The output of stone mill pulverizing equipment is related to the economic benefits of stone mill pulverizing equipment users, so everyone is eager for the output of stone mill pulverizing equipment to reach a certain quantity. Therefore, due to different ingredients, the output of many stone mill pulverizing equipment will not meet the standard. What is the reason? What should we do in this case?

如果石磨制粉设备的产量太低，检查下面的石磨制粉设备的磨辊是否会出现异常。如果磨辊出现异常，那么就要考虑以下几个因素

If the output of the stone mill pulverizing equipment is too low, first check whether the grinding roller of the following stone mill pulverizing equipment will be abnormal. If the grinding roller is abnormal, the following factors should be considered

①石磨制粉设备研磨物料的容量。小麦逐步磨碎后，随着胚乳下垂和刮削，物料的容重随着磨皮次数的推回而降低，粉碎机的单位流量也随之降低。

① Capacity of grinding materials of stone mill pulverizing equipment. After the wheat is gradually ground, with the endosperm sagging and scraping, the bulk density of the material decreases with the pushing back of the grinding times, and the unit flow of the crusher also decreases.

②石磨制粉设备磨齿高度。在磨削过程中，由于磨齿下垂磨损，磨齿难以抓住物料，磨辊表面的滑动增大，即物料在磨削区的移动速度加快减少。并且由于磨齿高度降低，两磨齿间隙中的物料减少，从而使平面磨床的产量降低。

② Grinding gear height of stone mill pulverizing equipment. In the grinding process, due to the sagging wear of the grinding teeth, it is difficult for the grinding teeth to grasp the material, and the sliding of the grinding roller surface increases, that is, the moving speed of the material in the grinding area increases and decreases. And because the grinding height is reduced, the material in the gap between the two grinding teeth is reduced, so that the output of the plane grinder is reduced.