济南中阳石磨电器有限公司

全国热线电话:

17116125111

热门搜索: 豆浆石磨机 石磨面粉机 豆浆石磨机 石磨面粉机
联系我们
    济南中阳石磨电器有限公司
  • 联系:和经理
  • 电话:17116125111
  • 手机:17116125111
  • 邮箱:3471464452@qq.com
  • 网址:http://www.zysmcn.com
  • 厂址:山东省济南市章丘区相公庄镇
新闻资讯 您现在的位置:首页 - 新闻资讯

面粉石磨机出面少或出粉率低是怎么回事?

来源:http://www.zysmcn.com/发布时间:2022-03-08

面粉石磨机出面少或出粉率低是怎么回事? How is it that the flour stone mill has less flour or low flour yield? 昨天一

面粉石磨机出面少或出粉率低是怎么回事?
How is it that the flour stone mill has less flour or low flour yield?
昨天一客户问我,面粉石磨机出面少呢,这种情况可能和小麦质量有关,也有可能跟设备质量有关,每个厂家生产的面粉石磨机出面率都不太一样,济南中阳石磨面粉石磨机生产厂家总结磨面机从出粉率低的原因。
Yesterday, a customer asked me that the flour stone mill has little flour output. This situation may be related to the quality of wheat or equipment. The flour stone mill output rate produced by each manufacturer is different. Jinan Zhongyang stone mill flour stone mill manufacturer summarized the reasons for the low flour output rate of the flour mill.
当面粉石磨机工作正常时,麸皮大小均匀,无胚乳颗粒,附面少,呈暗黄色。麸片太大时,皮磨轧距必偏宽,出粉率降低;麸片太小,皮磨轧距偏窄,出粉率上升。麸片大小不均时,面粉加工机械皮磨磨辊间隙两侧肯定不一样,当麸片附面多,显白色时,多是心磨轧距偏宽,取粉率下降所致;当麸片中含有胚乳颗粒时,可能是心磨磨辊间隙两侧不一致,或是心磨离合没合闸。
When the flour stone mill works normally, the size of bran is uniform, there are no endosperm particles, there are few boundary surfaces, and it is dark yellow. When the bran is too large, the milling distance must be wider and the flour yield will be reduced; The bran is too small, the milling distance is too narrow, and the flour yield increases. When the size of bran is uneven, the gap between the two sides of the bran grinding roller of flour processing machinery must be different. When the bran has many boundary surfaces and appears white, it is mostly due to the wide central grinding distance and the decrease of powder extraction rate; When the bran contains endosperm particles, it may be that the gap between the two sides of the grinding roller is inconsistent, or the clutch of the grinding roller is not closed.
操作时要经常观察麸皮和次粉来判断出粉率的变化,以尽快采取措施。面粉加工机械振较大,时常引起轧距的变松或变紧,造成出粉率变化。在生产操作时要经常检查磨面机的轧距,及时纠正轧距变化引起的出粉率波动。
Take measures as soon as possible to judge the change of wheat bran and flour yield. The vibration of flour processing machinery is large, which often causes the loosening or tightening of rolling distance, resulting in the change of flour yield. During production and operation, the rolling distance of the grinding machine shall be checked frequently, and the fluctuation of powder yield caused by the change of rolling distance shall be corrected in time.
大家好,今天问大家一个俗气但有实用的问题,农村磨坊有的配有清粮机、洗麦机,而有的磨坊不配置这些设备?为什么呢,之前采访过一位我的客户,他的磨坊只有磨面机,没有洗麦机,看到磨面机加工的小麦中含有很多麦秆杂质,看起来很脏的样子,不清楚是人食用的,还是磨粉为牲畜。
Hello everyone, today I ask you a tacky but practical question. Some rural mills are equipped with grain cleaners and wheat washers, while some mills are not equipped with these equipment? Why? I interviewed one of my customers before. His mill only has a flour mill without a wheat washing machine. I saw that the wheat processed by the flour mill contains a lot of straw impurities and looks very dirty. I don't know whether it is eaten by people or ground for livestock.
现在小麦都是大型联合收割机,然后拉到马路上晒干,这样就造成了小麦中含有麦秆、泥块、石子等杂质。如果小麦不清洗直接磨面话,不但会损伤磨面机,而且磨出面会牙碜。我们清洗小麦方法分为人工清洗和机器清洗,如果是自己磨面供给家人食用,可以使用人工清洗方法。但如果是开面粉厂,人工清洗费时又费力,建议用清粮机、洗麦机清洗小麦,这样既方便又轻松,而且清理的非常干净。
Now wheat is a large combine harvester, which is then pulled to the road to dry, resulting in wheat containing straw, mud, stones and other impurities. If the wheat is not cleaned and grinded directly, it will not only damage the grinder, but also make the flour shabby. Our wheat cleaning methods are divided into manual cleaning and machine cleaning. If we grind our own flour for family consumption, we can use manual cleaning methods. However, if it is to open a flour mill, manual cleaning is time-consuming and laborious. It is recommended to use a grain cleaner and wheat washer to clean the wheat, which is convenient and easy, and the cleaning is very clean.
相关新闻
相关产品
首页 走进中阳 产品中心 石磨小吃 新闻资讯 联系我们 网站地图 XML TXT
济南中阳石磨电器有限公司

鲁公网安备 37018102000574号