济南中阳石磨电器有限公司

全国热线电话:

17116125111

热门搜索: 豆浆石磨机 石磨面粉机 豆浆石磨机 石磨面粉机
联系我们
    济南中阳石磨电器有限公司
  • 联系:和经理
  • 电话:17116125111
  • 手机:17116125111
  • 邮箱:3471464452@qq.com
  • 网址:http://www.zysmcn.com
  • 厂址:山东省济南市章丘区相公庄镇
新闻资讯 您现在的位置:首页 - 新闻资讯 >

石磨面粉机是如何工作的?

来源:http://www.zysmcn.com/发布时间:2021-08-23

石磨面粉机以其低速研磨的特点,使粮食在加工的工程中温度升高不大,石磨和粮食之间自然摩擦,不仅使营养成分损失小,而且石磨中含有的矿物质也增加了面粉的营养。

石磨面粉机以其低速研磨的特点,使粮食在加工的工程中温度升高不大,石磨和粮食之间自然摩擦,不仅使营养成分损失小,而且石磨中含有的矿物质也增加了面粉的营养。
The stone mill flour mill has the characteristics of low-speed grinding, so that the temperature of grain in the processing project does not increase much. The natural friction between stone mill and grain not only reduces the loss of nutrients, but also the minerals contained in stone mill increase the nutrition of flour.
石磨面粉机是由两个圆形石头上下组合而成的,传统的圆石都是经过纯手工所雕凿成扁圆柱形,在两扇圆盘凿出一道道斜纹,叫磨齿。石磨磨齿制作是一项很强的复杂技术,其合理、自然、科学的设计特征,必须要手工调制,它的角度、尺寸、间隙是一切现代化工具不可替代的!上面的磨盘还凿上孔,与下盘咬合,固定在一个架座上,且下扇中间有一短的立轴,用铁制成,上扇中间有一个相应的空套,两扇相合,下扇固定,上扇才能绕轴逆向转动。
The stone mill flour mill is composed of two round stones from top to bottom. The traditional round stones are carved into flat cylindrical shapes by hand, and the two discs are chiseled with twill lines, called grinding teeth. The manufacture of stone grinding teeth is a strong complex technology. Its reasonable, natural and scientific design features must be manually modulated. Its angle, size and clearance are irreplaceable by all modern tools! The upper grinding plate is also chiseled with an upper hole, engaged with the lower plate and fixed on a frame seat, and there is a short vertical shaft in the middle of the lower fan, which is made of iron, and there is a corresponding empty sleeve in the middle of the upper fan. The two fans are combined, the lower fan is fixed, and the upper fan can rotate reversely around the shaft.
同时,两扇的接触面有一个空膛,叫作“磨膛”。膛的外周还有此起彼伏的磨齿,上磨还留有磨眼,磨东西的时候,谷物通过磨眼流入磨膛,均匀地分布在四周,被磨成粉末,从夹缝中流到磨盘上。
At the same time, there is an empty chamber on the contact surface of the two fans, which is called "grinding chamber". There are grinding teeth on the periphery of the chamber one after another, and there are grinding eyes on the upper grinding. When grinding things, grain flows into the chamber through the grinding eyes and is evenly distributed around. It is ground into powder and flows to the grinding plate from the crevice.
石磨面粉机的上扇在作旋转运动,其磨齿与下扇的磨齿相互间咬合以及相错,而形成很微小的升降运动,于是上下扇之间便出现了瞬息的齿隙,使加工的粮食通过上扇的孔道不断进入磨齿。面粉就在这样的研磨中生产出来。
The upper fan of the stone mill flour mill is rotating, and its grinding teeth and the grinding teeth of the lower fan are engaged and staggered with each other to form a very small lifting movement. Therefore, there is a momentary tooth gap between the upper and lower fans, so that the processed grain continuously enters the grinding teeth through the hole of the upper fan. Flour is produced in such grinding.
相关新闻
相关产品
首页 走进中阳 产品中心 石磨小吃 新闻资讯 联系我们 网站地图 XML TXT
济南中阳石磨电器有限公司技术支持:网站建设-推广运营

鲁公网安备 37018102000574号